BP Indonesia

Nilai Inti & Prinsip Perusahaan

• Safety (Keselamatan): Prinsip mutlak tanpa kompromi. Keselamatan kerja adalah hukum tertinggi dalam setiap jengkal operasional mereka.
• Respect (Rasa Hormat): Menghargai keberagaman latar belakang, keterbukaan ide, dan menjunjung tinggi hak asasi manusia.
• Excellence (Keunggulan): Berkomitmen memberikan hasil terbaik lewat inovasi tiada henti dan kedisiplinan eksekusi.
• One Team (Satu Tim): Menghapus sekat-sekat ego sektoral untuk membangun kolaborasi yang solid demi tujuan bersama.
• Sustainability (Keberlanjutan): Menyeimbangkan bisnis dengan tanggung jawab lingkungan untuk masa depan bumi.

Struktur Jenjang Karir

1. Entry Level / Graduate Programme: Gerbang awal bagi fresh graduate melalui pelatihan intensif rotasional.
2. Professional / Specialist: Fase bagi tenaga ahli yang memegang kendali teknis operasional atau manajerial tingkat awal.
3. Team Leader / Manager: Mengelola tim, proyek strategis, dan bertanggung jawab atas target divisi.
4. Director / Executive: Penentu kebijakan dan arah strategis perusahaan di tingkat korporasi.

Estimasi Gaji Karyawan 

Catatan: Angka di bawah ini merupakan estimasi rata-rata pasar dan dapat bervariasi tergantung pada pengalaman, lokasi penempatan (kantor pusat vs tapak proyek/offshore), serta tunjangan spesifik.

Tips Jitu Lolos Seleksi

• Kuasai Aspek HSSE: bp sangat memprioritaskan keselamatan. Saat wawancara, tunjukkan bahwa Anda memiliki kepedulian tinggi terhadap aspek Health, Safety, Security, and Environment.
• Tonjolkan Kemampuan Kolaborasi: Dalam tahapan Assessment Center, jangan menjadi dominan secara egois. Tunjukkan bagaimana Anda mendengarkan dan membawa solusi bagi kelompok (cerminan nilai One Team).
• Asah Bahasa Inggris Bisnis: Sebagai perusahaan global, seluruh proses seleksi tingkat lanjut dan komunikasi harian akan menggunakan bahasa Inggris.
• Pahami Isu Transisi Energi: Pelajari visi global bp mengenai “Net Zero Emission”. Kandidat yang tahu arah masa depan industri energi memiliki nilai plus yang besar.

Komitmen kami dalam menghadirkan inovasi dan layanan terbaik tidak pernah berhenti. Untuk mendukung ekspansi bisnis pada September 2026, BP Indonesia mengundang Anda para profesional independen dan bertalenta untuk mengambil peran strategis di perusahaan kami. Kami percaya bahwa sumber daya manusia adalah kunci utama keberhasilan. Jika Anda memiliki dedikasi tinggi, rekam jejak yang solid, dan siap memberikan dampak positif, temukan posisi yang sesuai dengan keahlian Anda di bawah ini:

Lowongan Kerja BP Indonesia

1. Senior Rotating Engineer – Jakarta, Indonesia

In addition to a Bachelor’s degree or higher in mechanical engineering, it is essential that the successful candidate also demonstrates:

• At least 15 years in major projects and/or oil and gas operations; gas-turbine and LNG operations experience is preferable.
• Application of API, ISO, ANSI and NFPA standards for rotating equipment.
• Design and operating experience for gas turbines, steam turbines, compressors, pumps and electric motors.
• Experience with dry-gas and mechanical seals, vibration analysis, condition monitoring and rotating auxiliaries.
• Experience in turnarounds, maintenance, startup and shutdown; OEM/contractor management; equipment lists, P&IDs, PFDs, wiring and control-logic diagrams.
• Experience in HSSE and quality management; able to work office and site based.

Additionally, it would be beneficial to have:

• Ability and understanding of the architecture of System 1 EVO.
• Experience in Gas Turbine Frame-7EA and LM 6000 aero derivative turbine
• Experience in applying digital technologies, advanced analytics or predictive-maintenance tools on equipment reliability improvement.
• Membership of a relevant professional engineering institution.

2. Senior Process Engineer – Jakarta, Indonesia

In addition to a Bachelor’s degree or higher in Chemical Engineering, it is essential that the successful candidate also demonstrates:

• Minimum 15+ years of process-engineering experience in oil and gas with an operator, consultant or EPC.
• Strong LNG onshore-processing understanding with knowledge of offshore facilities and LNG export systems.
• Proficient in Aspen HYSYS and international-standard engineering calculations.
• Familiar with PI ProcessBook/PI Vision, Palantir and data-analysis tools.
• Knowledge of risk management and Locked Open/Locked Closed Valve management

Additionally, it would be beneficial to have:

• Remote-site LNG operations; startup, commissioning or major turnaround; barrier health and bowtie knowledge.
• Membership of a relevant professional engineering institution.

3. Mechanical Engineer Static – Jakarta, Indonesia

In addition to a Bachelor’s degree or higher in Mechanical Engineering, it is essential that the successful candidate also demonstrates:

• Minimum 10 years in oil and gas as mechanical/piping engineer across office and site work.
• Experience in engineering, EPC/EPCC and/or operating-company environments.
• Practical application of mechanical equipment standards and practices.
• Validated fitness-for-service and repair experience for piping, shell-and-tube and air-cooled heat exchangers and combustion equipment.
• Deep vibration-induced-fatigue experience; practical small-bore-tubing experience; familiarity with valves and pressure safety valves.
• Regular Tangguh site visits and partial travel required.

Additionally, it would be beneficial to have:

• Full engineering life cycle; process safety/risk management; LNG project and/or operations experience.
• Membership of a relevant professional engineering institution.

4. Instrument & Control Engineer – Jakarta, Indonesia

In addition to a Bachelor’s degree or higher in Electrical or Physics Engineering, it is essential that the successful candidate also demonstrates:

• Minimum 10 years of instrument engineering experience in oil and gas, consultancy or EPC; LNG/O&G O&M exposure strongly preferred.
• Proficient instrument knowledge and developed electrical knowledge.
• Familiar with instrument software/system analysis and hazardous-area installation.
• Familiar with and experienced in ICSS platforms (e.g., Yokogawa CENTUM VP and ProSafe-RS) as well as industrial control systems and PLCs (e.g., Allen-Bradley, Siemens, etc.).
• Knowledge of GE Mark VIe/Mark VIeS systems will be considered an added advantage.
• Familiar & experience in managing instrument reliability, O&M and moderate to significant instrument/control RCFA exposure.
• Experience in plant support, upset/trip troubleshooting and immediate-cause analysis.
• Knowledge of ICSS, field instrumentation, fire and gas, analyzer and measurement systems, automation and digital security.
• Exposure to live-plant brownfield modifications and tie-ins; strong communication, ownership and delivery focus.

Additionally, it would be beneficial to have:

• Membership in relevant professional engineering institution and/or TÜV Functional Safety Engineer (FS Eng.) certification.

5. Electrical Engineer – Jakarta, Indonesia

In addition to a Bachelor’s degree or higher in Electrical Power Engineering, it is essential that the successful candidate also demonstrates:

• Minimum 10 years of electrical engineering experience in oil and gas, engineering consultancy or EPC; LNG/O&G O&M exposure strongly preferred.
• Proficient electrical knowledge and developed instrumentation and control knowledge.
• Familiar and conversant with ETAP for power system analysis, including harmonic analysis and system stability study.
• Hands-on experience in power system management and power generation operating mode & philosophy.
• Strong fundamental knowledge and hands-on experience in electrical installation and design in hazardous areas in compliance with IEC Ex/ATEX directives.
• Fundamental knowledge in electrical reliability, O&M and moderate to significant electrical RCFA exposure.
• Experience in plant support, upset/trip troubleshooting, immediate-cause analysis, power-management systems, generation control and protection.
• Exposure to live-plant brownfield modifications and tie-ins; strong communication, ownership and delivery focus.

Additionally, it would be beneficial to have:

• Membership in relevant professional engineering institution.

Informasi Pendaftaran :
Silahkan kirimkan berkas lamaran dan berkas pendukung lainnya melalui tombol “Apply Here” dibawah ini.